[trx450r_jbracing_rearend_mx] $1195.  


This newly designed swing arm & linkage kit is an absolute must have for the serious Honda TRX Motocross Racer.

This newly designed Swing arm & Linkage utilizes 5 inches of shaft travel. This amazingly lower leverage ratio allows for much lower shock temperatures during long hard races- giving you a much more consistent ride. With the progression ratio built into this rear end kit - it is possible to run a single rate spring setup for most applications and reduces the need for the progressive rate or dual rear spring setup that is needed to Band-Aid many rear end setups with poorly designed progression ratios.

What this design means for you:

* More wheel travel

* The correct up travel of the rear wheels

* The correct down travel of the rear wheels

* Plusher ride

* Good bottoming resistance

* Completely eliminates the kick that the stock rear end has from the shock bottoming due to poor up travel of the rear wheels

* Cooler shock temps

* Longer shock life between service

This kit is available for all the 2004-2006 TRX450R. There are also separate kits available for MX, XC, and Sand. This kit is available with a Elka, PEP, or with a Custom Axis rear shock.

**Remember - you will also need a new rear shock for this long travel kit.

The functions of the linkage utilized in this kit are Patent Pending.

Swingarm and new dual linkage - $1195.00






 

[all prices are subject to change]
[action photos by ROXSTAR images]

.

Hetrick Racing, Inc. | 814.676.0477 | 186 Oakwood Road | Oil City, PA 16301